1mm Impermeable High Density Geomembrane Lining for Sewage Disposal

Every member from our high efficiency sales team values customers' needs and business communication for LLdpe Geomembrane Pond Liner, Plastic Grass Grid Pavers, geocellular confinement systems. Qualified R&D engineer will be there for your consultation service and we will try our best to meet your requirements. We fight price, fight quality, fight time, customer's high repurchase rate is the best proof.

Geomembrane in mining works

Geosynthetics enhance the economic and environmental performance of mining operations. They are one part of how mining companies achieve their goals. The heap leach projects are some of the largest users of geomembranes, by some estimates consuming 40% of all geomembrane produced, and continued uses are still being developed.

High-density polyethylene (HDPE) geomembranes feature exceptional chemical, stress crack, and UV resistance. They have the durability and chemical compatibility to withstand aggressive mining heap leach solutions in stacks and solution trenches. Available texturing can enhance the frictional characteristics necessary for lining system slope stability. And for onsite water management and processing fluid containment, geomembranes are an economical and efficient solution.

When valuable deposits in the ore are mined, the remaining ore is waste. Contaminated or harmful to the environment during the extraction process, the tailings must be isolated to prevent long-term damage to the environment. All or most of the tailing area must be sealed with impervious geomembrane or composite lining system. These sealing systems can protect the bottom and walls of the reservoir. After the mine is closed, the surface of the tailings is usually covered by geomembrane and geosynthetic clay patch.

In mining applications, such as heap leaching facilities, evaporation ponds or tailings ponds, very high loads are usually present, and geomembranes are more commonly used. The typical raw materials of geomembrane are: linear low density polyethylene (LLDPE), high density polyethylene (HDPE), polyvinyl chloride (PVC), polypropylene (PP), and EPDM (EPDM). Then due to its high chemical resistance and physical properties, HDPE geomembrane is mainly used. Usually use greater than or equal to 0.75mm (30 mil).

MTTVS^® has high-quality geomembranes applicable to all aspects of mining operations to help mines increase production, control environmental threats, improve site safety and ensure responsible closure.

FEATURE

● Excellent chemical resistance

● Excellent resistance to stress cracking

● UV resistance

● Durability and chemical compatibility

● Controllable erosion

● Impermeability

APPLICATION

● Heap Leaching

● Tailing mangement

● Evaporations ponds

● Mine closure

● Access roads

Geomembran for mining specification

Properties	TEST METHOD	FREQUENCY	UNIT ENGLISH(METRIC)	MINIMIUM AVERAGE ROLL VALUE ENGLISH(METRIC)
				MTTVS 30mil HD	MTTVS 40mil HD	MTTVS 60mil HD	MTTVS 80mil HD	MTTVS 100mil HD	MTTVS 120mil HD
Thickness Lowest individual reading	ASTM D 5199	every roll	mil(mm)	30(0.750) 27(0.675)	40(1.00) 36(0.90)	60(1.50) 54(1.35)	80(2.00) 72(1.80)	100(2.50) 90(2.25)	120(3.0) 110(2.75)
Density	ASTM D 1505	200,000lb(90,000kg)	g/cm3	0.940	0.940	0.940	0.940	0.940	0.940
Tensile Properties(Each Direction)	ASTM D 6693,Type IV
Strength at break	Dumbell,2 ipm	20,000lb(9000 kg)	lb/in-width(N/mm)	114(20)	152(27)	228(40)	304(53)	380(67)	456(80)
Strength at yield			lb/in-width(N/mm)	63(11)	84(15)	126(22)	168(29)	210(37)	251(44)
Elongation at Break	G.L.2.0in(50mm)		%	700	700	700	700	700	700
Elongation at Yield	G.L.1.3in(33mm)		%	12	12	12	12	12	12
Tear Resistance	ASTM D 1004	45,000lb(20,000kg)	lb(N)	21(93)	28(125)	42(187)	56(249)	70(311)	84(374)
Puncture Resistance	ASTM D 4833	45,000lb(20,000kg)	lb(N)	54(240)	72(320)	108(480)	144(640)	180(800)	215(960)
Carbon Black Content	ASTM D 1603*4218	20,000lb(9000 kg)	%(range)	2.0-3.0	2.0-3.0	2.0-3.0	2.0-3.0	2.0-3.0	2.0-3.0
Carbon Black Dispersion	ASTM D 5596	45,000lb(20,000kg)	For 10 different views:9 in Categories 1 or 2 and 1 in Category 3
Notched Constant Tensile Load	ASTM D 5397,Appendix	200,000lb(90,000kg)	hr	300	300	300	300	300	300
Standard Oxidative Induction Time	ASTM D 3895,200℃;O2,1atm	200,000lb(90,000kg)	mins	>100	>100	>100	>100	>100	>100
High pressure Oxidative Induction Time	ASTM D 5885	200,000lb(90,000kg)	mins	>400	>400	>400	>400	>400	>400
Oven Aging at 85℃ retained after 90 days	ASTM D 5721	per each formulation	%
Standard Oxidative Induction Time	ASTM D 3895	per each formulation	%	55	55	55	55	55	55
High pressure Oxidative Induction Time	ASTM D 5885	per each formulation	%	80	80	80	80	80	80
UV resistance
Standard OIT After 1600 hours of UV			%	50	50	50	50	50	50
High pressure OIT After 1600 hours of UV			%	50	50	50	50	50	50
Water vapor permeability coefficient			g.cm/(㎠.s.Pa)	≤1.0×10-13
TYPICAL ROLL DIMENSIONS
Roll Length			ft(m)	1,120(341)	870(265)	560(171)	430(131)	340(104)	230(70)
Roll Width			ft(m)	22.5(6.86)	22.5(6.86)	22.5(6.86)	22.5(6.86)	22.5(6.86)	22.5(6.86)
Roll Area			ft2(m2)	25,200(2,341)	19,575(1,819)	12,600(1,171)	9,675(899)	7,650(711)	5175(473)

NOTES:

(1) Roll Lengths and widths have a tolerance of ±1%.

(2) HDPE Smooth is available in rolls weighing approximately 4,000 lb (1,800 kg).

(3) All geomembranes have dimensional stability of ±2% when tested according to ASTM D 1204 and LTB of <-77˚C when tested according to ASTM D 746

About MTTVS^® factory

MTTVS^® Geosynthetics Company specializes in the research, development, production, promotion and application of geosynthetics, and is the world's leading supplier of geosynthetics. Founded in 2014 and located in Shandong, China, it has ISO9001, ISO14001 and ISO45001 international authoritative management system certifications. It has strong strength. It has more than 10 international advanced equipment production lines and a large professional engineering and technical team. It has successfully integrated and developed core markets. Customers create maximum value. Through the processing of synthetic raw materials. We develop, manufacture and provide innovative and reliable geosynthetics to improve the performance of our customers' products. Our main business is the production and export of one-stop services and products such as geotextiles, geomembranes, geogrids, geocells, three-dimensional composite drainage nets, ecological bags, drainage boards, 3D geomats, etc.

Our products are exported to 56 countries around the world. Our main customers are from the United States, Germany, Pakistan, India, Kenya, Vietnam, Mirru, Ukraine, Uganda, Bolivia, Ecuador, Australia, France, Sweden, United Kingdom, Hong Kong, Hungary, New Zealand, Poland, Mexico, Brazil, Bangladesh, Thailand, Malaysia, Indonesia, Singapore, Philippines, Sri Lanka, UAE, Saudi Arabia, Qatar, Ghana, Ethiopia, Somalia, Nigeria, South Africa, Swaziland, Mongolia, etc.

Today, we not only manufacture the best quality geosynthetics products, but also provide professional design and installation services. OEM, ODM, custom development and manufacturing can also be provided. MTTVS^® Geosynthetics is a strong brand manufacturer in the production, promotion and sales industry. By providing advanced solutions and products in various applications and markets worldwide, MTTVS^® Geosynthetics continues to set industry standards and become the most important leader.

Welcome global industry partners to discuss cooperation!

MTTVS^® geosynthetics you can trust.

New Delivery for 1mm Impermeable High Density Geomembrane Lining for Sewage Disposal. We believe that a scientific human resource management mechanism is the fundamental guarantee to realize the company's talent strategy. The three elements of corporate slogan, corporate philosophy and customer experience explain the meaning behind our company's existence, and at the same time clarify the basic principles that are the foundation of the company.

Hot Tags: HDPE lining for water tank, China, suppliers, manufacturers, factory, customized, wholesale, buy, cheap, low price, free sample, High Density Polyethylene Geomembrane, geocellular confinement systems, HDPE plastic safety fence, Polypropylene Biaxial Geogrid, Hdpe Lining For Ponds, Geonet