Waterproof Board of New Waterproof Material for Tunnel.
Long-term durability
High interface friction angle
Pads up to 8m wide
Chemical resistance
Conforms to U.S. standards
For landfill
Customized according to needs
Product Introduction
Professionalism is a work ethic that reflects our focus on creating lean, efficient and superior hdpe pond liner 500 micron, The plastic biaxially oriented BOP net, Non Woven Geotextile Fabric. We actively explore the cooperation mechanism of "deep integration, efficient collaboration and complementary advantages". The company pays attention to the development of every employee, while providing superior working and living environment for employees, we attach great importance to the all-round quality training for employees. Our company is market-oriented and its products enjoy a certain reputation in the domestic market. After years of accumulation and development, we gradually have a complete and effective quality management system and a highly efficient and thoughtful after-sales service system. On the premise of ensuring the development of customers, we will drive the company's own development and improvement, and ultimately achieve a mutually beneficial and win-win situation!
LANDFILL LINER(HDPE SMOOTH GEOMEMBRANE)
Modern landfills are specifically designed to protect human health and the environment by controlling water and air emissions. All MSWLF must comply with regulations include: Composite Liners Requirements - Overlaid by a flexible and high-density polyethylene (HDPE) geomembrane (a membrane) compacted clay soil lining the bottom and sides of the landfill, protect groundwater and the underlying soil from leachate releases.. A landfill liner, or composite liner, is intended to be a low permeable barrier, which is laid down under engineered landfill sites. Until it deteriorates, the liner retards migration of leachate, and its toxic constituents, into underlying aquifers or nearby rivers, causing spoliation of the local water. HDPE Geomembrane to isolate landfill leachate. There are two types of geomembranes for landfills: smooth landfill liner and textured landfill liner;
MTTVS ®provides special geomembranes for landfills that meet international standards.
MTTVS ® Mechanical properties
● tensile strength and elongation (index, wide width, axisymmetric, and seams)
● tear resistance
● impact resistance
● puncture resistance
● interface shear strength
● anchorage strength
● stress cracking (constant load and single point).
MTTVS ® landfill liner application
● As liners for waste liquids (e.g., sewage sludge)
● As liners for variousLiners for radioactive or hazardous waste liquid
● Waste conveyance canals
● As liners for primary, secondary tertiary solid-waste landfills and waste piles
● As liners for heap leach pads
● To contain and transport liquids in trucks
LANDFILL LINER( Smooth HDPE Geomembrane ) Specifications:
|
Properties |
TEST METHOD |
FREQUENCY |
UNIT ENGLISH(METRIC) |
MINIMIUM AVERAGE ROLL VALUE ENGLISH(METRIC) |
|||||
|
MTTVS 30mil HD |
MTTVS 40mil HD |
MTTVS 60mil HD |
MTTVS 80mil HD |
MTTVS 100mil HD |
MTTVS 120mil HD |
||||
|
Thickness Lowest individual reading |
ASTM D 5199 |
every roll |
mil(mm) |
30(0.750) 27(0.675) |
40(1.00) 36(0.90) |
60(1.50) 54(1.35) |
80(2.00) 72(1.80) |
100(2.50) 90(2.25) |
120(3.0) 110(2.75) |
|
Density |
ASTM D 1505 |
200,000lb(90,000kg) |
g/cm3 |
0.940 |
0.940 |
0.940 |
0.940 |
0.940 |
0.940 |
|
Tensile Properties (Each Direction) |
ASTM D 6693,Type IV |
||||||||
|
Strength at break |
Dumbell,2 ipm |
20,000lb(9000 kg) |
lb/in-width(N/mm) |
114(20) |
152(27) |
228(40) |
304(53) |
380(67) |
456(80) |
|
Strength at yield |
lb/in-width(N/mm) |
63(11) |
84(15) |
126(22) |
168(29) |
210(37) |
251(44) |
||
|
Elongation at Break |
G.L.2.0in(50mm) |
% |
700 |
700 |
700 |
700 |
700 |
700 |
|
|
Elongation at Yield |
G.L.1.3in(33mm) |
% |
12 |
12 |
12 |
12 |
12 |
12 |
|
|
Tear Resistance |
ASTM D 1004 |
45,000lb(20,000kg) |
lb(N) |
21(93) |
28(125) |
42(187) |
56(249) |
70(311) |
84(374) |
|
Puncture Resistance |
ASTM D 4833 |
45,000lb(20,000kg) |
lb(N) |
54(240) |
72(320) |
108(480) |
144(640) |
180(800) |
215(960) |
|
Carbon Black Content |
ASTM D 1603*4218 |
20,000lb(9000 kg) |
%(range) |
2.0-3.0 |
2.0-3.0 |
2.0-3.0 |
2.0-3.0 |
2.0-3.0 |
2.0-3.0 |
|
Carbon Black Dispersion |
ASTM D 5596 |
45,000lb(20,000kg) |
For 10 different views:9 in Categories 1 or 2 and 1 in Category 3 |
||||||
|
Notched Constant Tensile Load |
ASTM D 5397,Appendix |
200,000lb(90,000kg) |
hr |
300 |
300 |
300 |
300 |
300 |
300 |
|
Standard Oxidative Induction Time |
ASTM D 3895,200℃;O2,1atm |
200,000lb(90,000kg) |
mins |
>100 |
>100 |
>100 |
>100 |
>100 |
>100 |
|
High pressure Oxidative Induction Time |
ASTM D 5885 |
200,000lb(90,000kg) |
mins |
>400 |
>400 |
>400 |
>400 |
>400 |
>400 |
|
Oven Aging at 85℃ retained after 90 days |
ASTM D 5721 |
per each formulation |
% |
||||||
|
Standard Oxidative Induction Time |
ASTM D 3895 |
per each formulation |
% |
55 |
55 |
55 |
55 |
55 |
55 |
|
High pressure Oxidative Induction Time |
ASTM D 5885 |
per each formulation |
% |
80 |
80 |
80 |
80 |
80 |
80 |
|
UV resistance |
|||||||||
|
Standard OIT After 1600 hours of UV |
% |
50 |
50 |
50 |
50 |
50 |
50 |
||
|
High pressure OIT After 1600 hours of UV |
% |
50 |
50 |
50 |
50 |
50 |
50 |
||
|
Water vapor permeability coefficient |
g.cm/(㎠.s.Pa) |
≤1.0×10-13 |
|||||||
|
TYPICAL ROLL DIMENSIONS |
|||||||||
|
Roll Length |
ft(m) |
1,120(341) |
870(265) |
560(171) |
430(131) |
340(104) |
230(70) |
||
|
Roll Width |
ft(m) |
22.5(6.86) |
22.5(6.86) |
22.5(6.86) |
22.5(6.86) |
22.5(6.86) |
22.5(6.86) |
||
|
Roll Area |
ft2(m2) |
25,200(2,341) |
19,575(1,819) |
12,600(1,171) |
9,675(899) |
7,650(711) |
5175(473) |
||
About MTTVS® factory
MTTVS® Geosynthetics Company specializes in the research, development, production, promotion and application of geosynthetics, and is the world's leading supplier of geosynthetics. Founded in 2014 and located in Shandong, China, it has ISO9001, ISO14001 and ISO45001 international authoritative management system certifications. It has strong strength. It has more than 10 international advanced equipment production lines and a large professional engineering and technical team. It has successfully integrated and developed core markets. Customers create maximum value. Through the processing of synthetic raw materials. We develop, manufacture and provide innovative and reliable geosynthetics to improve the performance of our customers' products. Our main business is the production and export of one-stop services and products such as geotextiles, geomembranes, geogrids, geocells, three-dimensional composite drainage nets, ecological bags, drainage boards, 3D geomats, etc.
Our products are exported to 56 countries around the world. Our main customers are from the United States, Germany, Pakistan, India, Kenya, Vietnam, Mirru, Ukraine, Uganda, Bolivia, Ecuador, Australia, France, Sweden, United Kingdom, Hong Kong, Hungary, New Zealand, Poland, Mexico, Brazil, Bangladesh , Thailand, Malaysia, Indonesia, Singapore, Philippines, Sri Lanka, UAE, Saudi Arabia, Qatar, Ghana, Ethiopia, Somalia, Nigeria, South Africa, Swaziland, Mongolia, etc.
Today, we not only manufacture the best quality geosynthetics products, but also provide professional design and installation services. OEM, ODM, custom development and manufacturing can also be provided. MTTVS® Geosynthetics is a strong brand manufacturer in the production, promotion and sales industry. By providing advanced solutions and products in various applications and markets worldwide, MTTVS® Geosynthetics continues to set industry standards and become the most important leader.
Welcome global industry partners to discuss cooperation!
MTTVS® geosynthetics you can trust
We are one of the famous enterprises with the largest scale, the strongest comprehensive strength and the highest degree of internationalization in the domestic Waterproof Board of New Waterproof Material for Tunnel. industry. We set ambitious goals based on our company vision and are guided by it to deliver exceptional quality and solutions that exceed our customers' needs. Hope to do business with you all.
Hot Tags: HDPE landfill liner geomembrane, China, suppliers, manufacturers, factory, customized, wholesale, buy, cheap, low price, free sample, High Steel Plastic Geogrid, High Strenghth Mining Grid, Mining, Geocomposite Dreinage Systems GDS , PP Uniaxial Geogrid Fabric, High Strength Woven Geotextiles
You Might Also Like
-
Factory Direct Sale Plastic Drainage Channel Polypropylene Linear Drainage Ditch Board
-
HDPE 3D Composite Drainage Geonet Used in Landfill Network Composite
-
PP Spunbond Filter Fabric Geotextile Fabric Polypropylene /Nonwoven Fabric for Face Masks and Disposable Coverall
-
China Factory Non-Asphalt High Polymer Self-Adhesive HDPE Pre-Applied Waterproofing Membrane for Below Ground Structure
-
Geomat PP +PE Material Stretch Net Geonet
-
Highway and Railways Biaxial Geogrid Polypropylene Geogrids at Cheap Price
Send Inquiry